HZHG-50kV-1.5 50kV AC/DC High Voltage Divider Digital Meter
|
Voltage grade |
AC/DC50kV |
|
|
Pressure ratio |
1000：1 |
|
|
Impedance |
200MΩ |
|
|
Accuracy |
DC value |
1.0 stage |
|
|
Exchange value |
1.5 stage |
Use Of Instructions
Open the upper cover of the aluminum alloy box, hold the voltage sharing ball counter clockwise rotation, unscrew the voltage sharing ball, remove partial pressure cylinder, a special digital measuring instrument and special cable. Then screw the ball in the pressure cylinder and place it in the required position.
On the base of the divider, the ground wire is firmly grounded on the ground wire.
Will be measured high pressure wire and the top of the divider are firmly connected to the ball.
The special cable end into the divider output hole. At the other end of the insert voltage measurement hole measuring instrument, it is important to note that in immediately prison.
According to the required measurement, select the measuring instrument place, the bottom of the switch on the floor to switch on the need to fight in the AC or DC file.
Load high pressure and record data.
After a while, the pressure of the instrument is displayed as zero, and demolition the experimental circuit.
